If you’re having trouble connecting your LG TV to your wifi network without using the remote, you’re not alone. In fact, there are a number of different ways that you can do this. But before you get started, it’s important to first understand what your TV can do. Using a keyboard and mouse is one option, but you can also use screen mirroring.
Troubleshoot an IR remote
If your LG TV is not connecting to WiFi, there are several things you can do to troubleshoot the problem. First, you should try restarting your TV. It may have a software issue or a hardware glitch. You can also check for internet service provider issues. Another issue that can prevent your TV from getting a signal is an outdated router.
Fortunately, if the tv does not have a built-in internet connection, you can connect to it via your modem or router. You can also use a smart phone hot-spot to test the connection. Once the connection is established, you can proceed with other troubleshooting steps.
If the tv does have a built-in internet connection, the problem can be caused by a faulty Wi-Fi adapter. The Bluetooth module in the LG TV can malfunction. A defective Wi-Fi module requires repair.
In some cases, a USB hard drive or cordless phone can interfere with your TV’s signal. This is a common cause of problems when you attempt to access the internet with your LG television. Other devices, such as a baby monitor or microwave, can also block the remote’s IR signals.
LG remotes have an infrared sensor that receives the remote signal and sends it to the TV. However, this sensor can be blocked by glass or other objects. Therefore, you should make sure to clear these obstacles.
One solution for your LG TV is to remove the blue tape that covers the WiFi ribbon cable. This will help you to reset the connection to your WiFi module. Also, try straightening the wires in the WiFi module.
If you have tried these solutions and the remote still does not work, the batteries might be faulty. Removing the batteries and replacing them with new ones can help. If the problem is still not resolved, you should contact LG customer support.
Before you call a customer support representative, it is important to note that you can also perform these troubleshooting steps yourself. However, you should know that some of them will require more time than others. For example, it can take as long as two or three minutes to complete a power cycle.
Turn WiFi on with PIN
If you are having trouble connecting your LG TV to the Wi-Fi, you might need to turn it on with PIN. There are a few different ways you can do this.
The first method involves going to the settings menu on your LG TV. The menu will have a button for network settings and a button for security settings. Using this button, you will have to manually enter a password. After the password is entered, you can select a WiFi network. This should not take you more than a few seconds.
Another way you can connect your TV to the internet is to use the WPS PBC button. You will need to hold this button down for three seconds. Once the screen displays “Connect via WPS PBC”, you will need to enter the PIN from your router.
As far as hardware goes, the LG TV is compatible with the WPS function. This is the easiest method to use. Alternatively, you can use an Ethernet cable to connect your TV to your router. Ensure that your ethernet cable is long enough to reach your TV.
Another option is to reset your TV and your router. This should solve the problem. First, you need to remove your TV from the stand and place it on a flat surface.
A third method is to power cycle your TV. To do this, you need to plug in the power cord. Power cycling the TV will force it to boot up in a fresh state. When it boots up, you can check if the TV is connected to the Internet.
Finally, you can manually update your software to get the latest features and bug fixes. By doing so, you can fix the problems your LG TV is having. These can include a lack of signal, the wrong time and date, and the lack of an active wireless connection.
To check your LG TV for any software updates, you can visit the LG support website. The website can be accessed by region, model number, and product.
Connect a mouse and keyboard
If you own an LG TV, it’s possible to connect a mouse and keyboard to your LG television via Wi-Fi. You can either use an external USB mouse, a Bluetooth keyboard or a dongle. However, you need to check your model to determine the appropriate connection method for your TV.
Most smart TVs support a wireless connection through Bluetooth or USB. In order to connect a mouse and keyboard to your TV, you’ll need to set up the correct Bluetooth or USB connectivity.
You’ll need to make sure that your LG TV is compatible with the devices you plan on using. To make sure, you can go to the LG support website to look at the list of recommended models. Also, you can check the digital user guild on the LG website to ensure that your model is compatible with Bluetooth or USB.
After you’ve made your selection, you’ll need to follow these instructions to connect a mouse and keyboard to your television. This is a quick and easy process. When you first plug a wireless mouse receiver into a USB port on your TV, you’ll see a cursor move on the screen.
Now you can begin to navigate your Smart TV with your mouse. If you have an LG TV, you can start by going to Settings. Then, hover your mouse over the “Live TV” option.
Clicking this button will take you to the input settings page. Next, you’ll need to click the “recommended” option. Once you do, you’ll be able to select the “Configure Network” option.
When you have selected the right option, you’ll need to enter the name of your network, your password and your password for the TV. Then, you can follow the rest of the instructions to configure your wireless network.
You can also use your smartphone as a remote for your LG TV. For example, you can install apps to stream videos and other content through your smartphone. Alternatively, you can use an ethernet cable to connect your device to your WiFi.
As with any computer or smartphone, you’ll want to test your device’s compatibility with your TV. You may have to buy a new dongle or replace the device.
Turn on screen mirroring
If you want to control your LG TV from your phone without having to use the remote, you can turn on screen mirroring. Screen mirroring is a feature that lets you watch content from an Android or Windows device on your LG TV. It is also known as screen casting. You can use your mobile device to play games, stream video, and control other aspects of the video.
Before you can turn on screen mirroring, you need to connect your LG TV to Wi-Fi. You can do this with a USB cable or HDMI cable, depending on your model of TV.
If you don’t have Wi-Fi, you can use an MHL adapter to connect your phone to the HDMI port of your TV. However, this method may not be reliable.
You can also use the Screen Share feature on your LG TV to cast your phone’s screen. This requires your LG TV to be connected to the same Wi-Fi network as your phone. When this is complete, you will see the on-screen menus on the screen of your LG TV.
You can also try casting your phone to your TV by using an external media streamer. Examples include Apple TV, Fire TV, and Roku.
To do this, you will need to set your TV to “Screen Share” mode. Then, you can open your smartphone’s screen mirroring app and select your LG TV from the list of devices.
To stop your screen mirroring, you can switch your device to another one. Or, you can simply end the process by turning your phone off.
You can also use third-party apps to connect your iPhone to your LG TV. You can download these apps from the App Store. Those apps can also support Peer-to-Peer AirPlay. These require a iOS device that is running on 2012 or later versions.
LG Smart TVs that are made after 2018 do not support screen mirroring from Apple devices. Nevertheless, you can still use screen mirroring on a non-smart TV. For example, you can connect your phone to a Blu-ray Disc player that has built-in Wi-Fi.