If your Chromecast remote is not functioning properly, there are a few fixes you can try.
Thankfully, these fixes are easy to implement and will enable you to get back to casting.
If your Chromecast remote isn’t functioning properly, the first step you should take is rebooting it. This simple yet effective fix should resolve most problems.
Check the batteries
If your Google TV remote isn’t functioning properly, it could be due to a battery issue. This is an often-reported cause of the problem and an easy fix.
To check the batteries on your Google TV remote, open up the battery compartment cover and take out both batteries. Leave them out for around 30 seconds, then reinsert them into your remote.
When inserting batteries, make sure they are in their correct positions with plus and minus signs facing outward on their respective terminals. If not installed correctly, your batteries won’t work.
The batteries in your remote control are essential for using the device and controlling your television. Without them, you won’t be able to operate the television properly, so it’s wise to replace them once they have run down.
Another way to check if the batteries are bad is by looking at the status LED on the remote. If it’s not functioning, the LED will be yellow and blinking rapidly.
If the remote still isn’t working, you can try factory reseting it. This is a simpler alternative than factory resetting and will restore both Google TV and Chromecast back to their default settings.
After clearing your device’s settings, you can re-pair your remote by pressing both Back and Home buttons simultaneously for three seconds. This will cause Google TV and Chromecast to search for each other again and pair properly.
Once installed, Chromecast allows you to stream movies, TV shows, YouTube videos and more from a single device. Plus you can control it using Google Assistant!
When dealing with this issue, there are plenty of solutions to try. But if none of them work and your remote remains unresponsive, replacing may be necessary.
Check the connection
If you’re having trouble connecting to your Chromecast, the first step should be checking your internet connection. If it’s strong, then connecting both your TV and Google Home device should be no problem. However, if it isn’t, there are a few steps you can take to resolve the problem.
If your wireless network is causing problems with your Chromecast, check its signal settings to see if the issue lies with either 2.4GHz or 5GHz bands. You can change which band your router is on in its settings (instructions should be on the underside of the router; otherwise, use a tool like WiFiInfoView for improved performance and reliability).
You can reset your router back to its default settings using the instructions found on its underside or by searching online for its model number.
Once you’ve reset your router, reconnect the devices to verify if the remote works again. If so, congratulations – you have now successfully resolved the issue.
One of the most frequent causes of connection issues is an incorrect wireless channel. Most routers allow you to switch between their channels, but if yours matches up with one used by your neighbors, interference can arise.
To resolve this problem, go into your router’s settings (instructions are usually found on the underside; if not, search online for the device model number) and make sure your network is set to 2.4GHz instead of 5GHz. Doing this will prevent interference from other networks on that band.
Another option is to factory reset your Chromecast. If you own a first or second generation model, look for the reset button on the side of the device – press and hold until it blinks yellow, then continue holding until solid white.
If you own a third-generation or later Chromecast, there is also a reset button located on the device itself. To factory reset your device, plug it into power and press and hold down on this button for around 10 seconds until it turns solid white; this action will clear out your data without damaging either your device or apps.
Check the settings
If your Google Chromecast is not connecting to your TV remote, the first thing to do is check its settings. If it’s paired correctly with your TV, it should work right away. However, if not, there are a few different approaches you can try.
One of the most frequent issues with a Chromecast remote is that it won’t respond to commands from your TV. There could be various reasons for this, but usually it means the remote isn’t pairing with your television.
Another common problem with remotes is freezing up. If this is happening to you, try performing a soft reset by taking out the batteries and pressing all buttons repeatedly for around 60 seconds. This should dislodge any dust or other debris which might be causing your problem.
You can perform a factory reset on the remote to delete all previous data and restore it to its default settings. This is often the best solution if you’re having trouble getting your remote to work with your TV, since it will start over from zero.
Before performing a factory reset on your Chromecast, be sure it is plugged into an electrical source and the television is turned on. Turning off the television may shut down its USB ports, making your Chromecast inaccessible.
One common reason a Chromecast remote won’t respond is due to a battery problem. If the batteries are dead, they may need replacing.
To do this, take your remote apart and replace its batteries with two AAA-sized 1.5-volt ones. These can be acquired at any hardware store or online.
Once the batteries have been replaced, ensure they’re in their proper positions to work optimally. Your remote should have a positive and negative terminal with the Minus sign of the battery sitting in its negative terminal.
If you’re still having difficulties, try performing a hard reset on your remote. Simply press and hold the Home button for about 15 seconds; this will force the remote to reset its internals and clear any dirt or debris that might be stopping it from communicating with your television.
Check the software
If you’re having issues with the remote, check your software to ensure there are no pending updates. Doing this may prevent future episodes of this problem from recurring.
If the Google TV software is outdated, it could be causing issues with your Chromecast remote. To check this, go to Settings, select System then ‘About’ and then ‘Check for Software Update’.
Once you’ve done this, try installing the update and seeing if that resolves your problem. If so, use the remote again for confirmation.
One common issue people experience with remote controls is when the volume buttons stop working. This could be due to accidental knocking out a button, or it could simply be an issue with the hardware itself.
You can take out the batteries from your remote and carefully place them back, but be sure to test if that has resolved the problem. If so, you’ll need to perform a factory reset on your device in order to get it up and running once more.
Another common problem people encounter is when their remote stops working properly and hangs. This can be incredibly frustrating, making it difficult to use your Google TV effectively.
To prevent this issue, you can use a smartphone to pair your remote with Chromecast. Doing so will guarantee it is correctly connected and functions optimally.
However, if it still doesn’t work, you can try factory reseting the Chromecast itself to get it up and running again. This will eliminate any remaining bugs and resolve the problem permanently.
You can factory reset the Chromecast by pressing and holding its reset button until light pulsates (approximately 10 seconds). Afterwards, you should be able to reconnect your Chromecast with remote and use it normally again.