If you’re having trouble getting your Roku TV remote to work, there are a few easy fixes you can try first. Your remote may be dirty, it may have gotten a little bit worn out from use, or your batteries could have died. To fix this, all you need to do is wipe down the buttons on the device, and if you’re using a new battery, you’ll need to recharge it.
Dirt, sweat, or lotion
One of the more common problems faced by TCL TV owners is that their remotes won’t work for no apparent reason. This can be attributed to a number of factors including but not limited to, dead batteries, broken IR points or bad pairing. There are some relatively simple things you can do to get your remote working again. Firstly, make sure that the batteries are in good working order. Then, ensure that you have an open Wi-Fi connection available. Lastly, ensure that you are not too close to the device while using it. It is important to remember that your remote is not made of stone, and it can be subject to damage from drops or bumps. If you are unable to repair the device yourself, your best bet is to find a friend with a spare TV remote and a few spare minutes on their hands.
If all else fails, you may need to shell out some cash for a new remote. While you are at it, you may want to consider replacing the batteries to ensure your remote will work for a long time to come.
Dying or worn-out batteries
If you’re having trouble pairing your TCL Roku TV remote, you might have worn or dying batteries. This can make it difficult to control your device, and it can even result in the remote not working altogether. The good news is that the problem is easily fixed.
Unlike older TVs, the Roku is capable of streaming online. But if you’re not able to pair your remote to the Roku box, you won’t be able to watch television, movies, or music.
Some common causes for this problem are poor batteries, a faulty or infrared signal, or a malfunctioning device. In most cases, you can repair a faulty remote by simply removing it from the wall socket and resetting it. However, if you’re having a hard time identifying the source of the problem, you might need to contact the manufacturer.
To fix a faulty Roku remote, you’ll first need to power cycle it. This involves unplugging the TV and the power adapter from the wall socket for about 15 seconds. After a couple of minutes, the device should be fully operational.
Alternatively, you can try to re-pair your remote. To do this, you’ll need to find the remote’s pairing button. It might be on the front or inside the battery compartment. You’ll also need to make sure that you are pairing your remote to the right TV.
When you’re ready to re-pair your remote, you’ll want to be sure that you’re using the same brand and type of batteries. Your remote will last longer if it’s paired with the same type of batteries.
You’ll also need to ensure that the wires connecting your TV and the remote aren’t damaged. You might also need to remove any power strips or surge protectors. Oftentimes, these items create a layer of protection between your TV and the wall socket.
Another option is to use a lint-free cloth to clean out the receiver sensor on your remote. Dirt can obstruct the infrared light and prevent it from delivering signals to the Roku box.
Lastly, you might need to buy a new remote. Usually, remotes that are heavily used won’t have as long of a lifespan.
Your TV may be in an enclosed space
There are numerous reasons why you might put your shiny new television on display, not the least of which is a theft deterrent. It’s also a nice change of scenery to say the least. Assuming your TV isn’t located in an office cubicle, you are likely to get plenty of oohs and aahs. Likewise, if you are lucky enough to have a garden, a television is just the ticket. A well-crafted, weatherproofed unit could be the perfect spot for a quiet, grown up evening of Netflix and chill.
One of the easiest ways to protect your investment is to simply build a weatherproofed cabinet. For less than a tenth of the cost of a high-end set, you can create your own outdoor glamping haven. Having said that, a few aforementioned pitfalls will abound. For example, the aforementioned moisture afflictions will inevitably lead to condensation. While a decent air conditioner should be a given, the best way to go is to avoid the culprits. If your television is not on display, it is easy to forget to open the cabinet door, and then forget to close it again. Also, a good idea is to have a central hub for powering your electronics.
Hard reset your TV
If your TCL Roku TV remote has stopped working, you may need to perform a hard reset. This process will reset your TV back to its factory default settings. However, before doing a hard reset, you will need to make sure that you’re able to access the Internet and a USB flash drive.
Before performing a factory data reset, you will need to connect your TV to the Internet and unplug any cables. In addition to this, you will need to reset your pin lock. You can do this by following the instructions provided on the box.
After you’ve successfully performed a factory data reset, you will be ready to restart your TCL Roku TV. The next step is to enter the master passcode. There are two options: you can either use the master pin code 0812 or 0423.
To do this, press the “OK” button on the screen. Now, the device will begin to load its home screen. Next, you will need to select the System Restart option. Follow the on-screen instructions to set up the TCL Roku TV.
Once you’ve done this, your device will restart itself. It may take a few seconds to start up, so be prepared to wait. Afterward, you can plug in your TV’s power cord and start streaming content.
If you are still having trouble, you can try performing a Software Update. This will help fix any bugs that your device has. Another option is to perform a hardware factory reset.
If you have a TCL Roku TV with a remote, you can perform a hard reset by pressing the Reset button. Simply hold the button down for about 12 seconds.
Some models also support Recovery Mode. If your TV is in Recovery Mode, you can clear all of your data, return it to normal operation, and restore your Roku account. Alternatively, you can talk to your Internet service provider about reconnecting to the network. Your personal settings will not be lost. Regardless of which method you choose, you’ll need to make sure that you unplug the power cord from the back of your TV.