Many users report difficulty locating the power button on their Samsung TVs. Fortunately, this issue can easily be rectified by following these simple steps.
On a Samsung TV, the power button is typically located beneath the center area of the panel. Simply reach down and feel around for it.
Underneath the TV
Many television manufacturers these days have chosen to place the power button on the underside of their sets, which makes sense. It takes away one more potential distraction from watching while you’re using it and also makes it easy to locate when you need to turn off or on your television.
On Samsung televisions, the power button is usually situated just underneath the center of the screen. You can usually locate it by reaching down and feeling around for any protrusions or buttons that feel clicky.
If you’re having difficulty locating the power button, consult your user manual or use a flashlight to illuminate it. Some models may even feature an under-the-screen LED light which may aid in finding it as well.
If you can’t locate the power button, check the back of your TV to make sure it is plugged in and working correctly. If all lights are illuminated but the TV won’t turn on, there may be a blown fuse or power supply issue.
These issues often stem from a power cord that’s been damaged or an inadequate surge protector. If this applies to you, contact Samsung support immediately to have the problem rectified.
One way to determine if your TV has a blown power cord is by pressing down on the power button while turned off. If the button turns red, your television has an issue and needs repair.
Make sure you use a surge protector to safeguard your home against electrical surges. If your TV doesn’t turn on after turning the power off and connecting it to the surge protector, it could have either a bad battery or blown fuse.
If your TV won’t turn on at all, try using the cold boot method to discharge any residual electrical charge inside it. This should allow it to reload its motherboard and start up normally again. Though this process may take some time, this is often the best way to get your television working again.
On the Front Right Bezel
Most Samsung TVs feature a power button on the front right bezel. These usually small and flat buttons are labeled in an off-white or gray color and include volume control, channel selector, mute/exit functions.
Some of Samsung TV’s more advanced models feature touch control buttons on their front right bezel. These can be used to turn on and off your television by pressing gently on them – however these may be difficult to locate and hard to overlook if you are unfamiliar with how your device operates.
The location of a power button on a Samsung TV can differ between models and even year to year. If you’re uncertain where yours is located, consult your television manual which contains an illustrated diagram showing all buttons and their locations.
Your TV may have a power button located either separately or integrated into the remote control. Either way, knowing where it is essential for quickly fixing any problems that arise.
Another common location for the power button is underneath the center of your screen. Although it may look different on each model, it’s easy to locate with just a little prod and feel around until you find it!
Samsung TVs often feature receivers beneath the front right of their screens (this is what your remote interacts with). Behind that receiver, there’s a small power switch that users often overlook.
Samsung TVs often lack a power button, but some feature touch control buttons that make turning on or off easier. These are usually located on the front right bezel of your television but may also be found at the back of the screen.
These buttons may be hard to spot due to their flat nature and off-white label. To ensure accurate detection, it’s recommended that you look closely for these tiny items.
On the Back Right Side
Your Samsung TV’s power button is typically located on the back right, just behind the receiver. This location is often chosen by manufacturers because most people are right-handed and they want to make it easy to locate.
If you’re having difficulty locating the power button on your Samsung TV, try moving it away from the wall and searching at the back right side. If that doesn’t yield results, flash a flashlight at the back of the television for a closer look.
You might also be able to locate the power button by taking out the back panel, which will show you all of its circuit boards.
Three main circuit boards should be visible on your TV screen: one translating the signal into a picture, another serving as the main controller and lastly, the power board. If you are experiencing either half black screen issues or horizontal lines on your screen, then it could be due to one of these three boards.
Once you’ve unplugged your Samsung TV from its outlet, use a small screwdriver to pry open the back and take out any screws holding the cover onto its circuit boards. Be careful as this may require some force so as not to damage the TV during this process.
A common cause of a half black screen on Samsung TVs is an issue with the T-Con board, located underneath the back panel. This small PCB drives the TV’s panel and can get covered in dust or grime if left uncovered, leading to incorrect clock signals being sent to LCD or OLED displays.
The T-Con board can be repaired by cleaning the dust or grime out of its ribbon cables that connect it to an LCD / OLED panel. Once done, reseat the cables and verify if your issue has been solved; if not, you’ll have to replace both components and reseat all ribbon cables connecting it to the panel.
On the Back Left Side
Samsung TVs feature power buttons that you can press to turn the television on or off. Depending on which model, these may be located in either the top right corner of the bezel or at the back left of its frame.
To locate the power button on your Samsung TV, start by pulling away from the wall. When you have access to the back of the television, move it slightly in an opposite direction and slowly slide your hand underneath until you locate its power button.
Once you’ve located the power button, testing out its function is usually a good way to determine if there’s an issue with your TV’s connections, software or firmware, or an internal component that needs replacing.
Before testing out the power button on your television, make sure there is no physical damage. This could include a cracked screen, loose connection or malfunctioning of any cables connecting it to an external device.
One common reason why Samsung TV’s display goes black is when there are issues with the backlight LEDs. These LEDs come in various lengths and are usually connected in series for even illumination across the screen.
However, LEDs may fail over time due to thermal degradation of their components. This could eventually result in your TV screen going dark or even turning off completely.
If your TV’s backlight is malfunctioning, you can try replacing the LEDs. This is a relatively straightforward DIY project; simply take apart the entire strip of LEDs and replace them with new ones.
Another option is to contact Samsung and see if there is a software update available for your television. This update may improve its performance.